characteristic:1. All liquid silica gel products can be produced and processed with different types of equipment of Jiechen, and different colors can be added according to user requirements;2. The equipment is equipped with modern SPS control system, and the machine can be operated easily through several switches and buttons;3. The switch contact can avoid material shortage and overpressure or low pressure;4. Pigments and additives are mixed in the mixing module of the feeder, which results in the shortest flushing path, which also reduces the material loss.5. The use of direct feed, so that air can not enter the pipe, no exhaust, greatly reduce the waste of raw materials and labor, can effectively eliminate the problem of AB ratio caused by raw material barrel deformation, unique design to ensure a stable feed ratio of 1:1.Applicable production scope:1. All the liquid silica gel injection molding machines are equipped to complete the A and B rubber pumping and feeding operations.2. Electronic products, auto parts, medical supplies, adult products, maternal and infant products, kitchen and bath supplies, diving supplies, etc. Technical parameters of liquid silica gel feeder

項目/PROJECT	單位/UNIT	參數/PARAMETER
送料壓力	Mpa	0-20
Feed pressure
輸出量	g/min	3500
Output quantity
供料系統	L	20/200
Feeding system
功率要求	V/HZ KW	380/50 2.2
Power requirement
混合比例	A:B	1:1
Mixing ratio
比例精度	AB	±1%
Ratio accuracy
空氣壓力	kgf/cm2	6
Air pressure
輸配管	M	Φ3/4*2.7
Transmission and distrbution
理論機重	T	960
Machine weight
機器尺寸 長*寬*高	M	1.3*1.05*2.3/3.1
The machine size L*W*H